SAVANAH GUTHRIE YOU ARE A DISGRACE!

 Do you think you are serving the public? You are supposed to be a journalist, but your attitude is disgraceful! You should know that half of the country is conservative and we deserve a better treatment of the President that we voted on.

Shame on you Savanah! If only I can say the words that I want to say to describe you but I won't. I do not have to lower my stature. Again, you are a disgrace!!!

SHUT UP BUTAGIEG!

 The former mayor of South Bend, Indiana is full of lies in blaming the chaos on President Trump. He/She is in cahoots with the main media in creating the narrative of lies. It is very sad that this kind of untruthful narrative is being proliferated in America. The socialist democrats are in this kind of narrative and it is an insult to the intelligence of the American people.

LORENZO LAMAS SHOULD BE DRAFTED TO RUN FOR MAYOR!

 I have heard Lorenzo speak to the #WalkAway followers. He does not realize it but he got the potential to be a great mayor! 

List of AHA* Members

Alexandria Ocasio-Cortez

Chuck Todd

Sanjay Gupta,

Nancy Pelosi

Jim Acosta

Don Lemmon

Anderson Cooper

Van Jones

Rachel Maddow

Lawrence O'Donnell

Chris Matthew

* This is my list of people are not helping the American People.

GOVERNOR PRITZKER IS NOT GREAT FOR ILLINOIS!

I have yet to hear something positive from this governor. He is working more for his party than for the citizens of Illinois. He has done nothing for Illinois except increase taxes. I hope he does not get reelected! 

MEDIA BLITZ NON-PRODUCTIVE COMMENTS

CNN, MSNBC, NEW YORK TIMES  commentators are in it again. These commentators have nothing to contribute except their uneducated comments. The negativity does not help the country, They have nothing to offer but pejorative remarks. What are they doing to the country? These commentators become the voices of the Chinese Communist Party. That's it! They are the voices of the CCP!

What else can you expect from these leftist "journalists." These are ungodly people - pro-abortion, anti-religion socialists!

POLITICIANS, STOP IT!!!

Firstly, politicians should realize that the Corona Virus crisis is NOT a political tool! I hate to see this situation as a means to proliferate their political attacks. Politicians should come around and civilly help the situation to the benefit of the citizens of this country. Enough is enough!
Secondly, be constructive, NOT destructive. Somehow, these politicians are getting used to political assassination. In the past three years, I have not seen the Democrats do anything positive for the country. I am not sure now whether the Democrats would come back to where I used to admire their politics. Enough is enough!
And lastly, I see some politicians pretend to be Christians and yet approve of the destruction of human life thru abortion. Enough is enough!!
Mr. Governor, Illinois is not the only state in America. The Federal government is doing their best to save lives. Your comment against the Federal Government is absurd if not unfair! Your pejorative remark is not helping the situation. Be kind! No need for harsh remarks.

GOVERNOR PRITZKER LISTEN UP!

HO-HUM, THE IMPEACHMENT INQUEST MAKES ME SLEEP!

I am not sure whether to agree or disagree with this impeachment procedure going on in congress.  I know for sure that these congressmen are wasting our hard-earned money. Can you imagine how many families can be helped by all that money being wasted on this inquiry?

I really do not want to comment on what is going on but it is irritating that the coverage preempts my favorite shows. It saddens me to see all that wasted money knowing that the inquiry will go nowhere. Congress is using this constitutional process as a tool to push through their political agenda. 

POLLSTERS, SHAPEUP!

Almost all pollsters, from the left or right, are mistaken in their sampling of the population. Hey guys, we are in America and we do not base the election on popular votes.

Why not poll on a State by State basis?

DO WE NEED RULES IN A BIBLE STUDY GROUP?

Well,  I think so. When I was a director of research at a certain chemical company we made sure that our meetings are productive and straightforward. No digressing beyond the subject at hand. Those who wanted to be heard are given the time, without interruption, to express his or her opinion. The Bible group I belong to can at times get out of hand and can sometimes become offensive, not respecting others that need to be heard also. So here is a proposal on the  rule that the group must adhere to at all times:

The Eleven Commandments of “ Bible Study”

1). Remember, this is a time of prayer!
2). Be Respectful!
3). Limit your speaking time!
4). Stay focused on the Scriptures!
5). Avoid social applications and unrelated stories!
6). What are the Traditions of the Church and how do they apply!
7). Avoid going “ off subject”!
8). Remember we are asking, “ what is the Lord telling us”!
9). Remember, Scripture is one of the Oral Traditions of the Church!
10). If you are not sure, Ask. The Church is the keeper of the Keys! 
11). Remember, this is a time of prayer!

So there enjoy your Bible Study!

GUANGMING SOFTWARE (GUANGMINGSOFT.NET) A SCAM?

I am a software developer, rather than reinventing the wheel, invest on components developed by other developers.
On September 10, 2017 I ordered a component from Guangmingsoft.net. They claim to have an excellent support but that did not fan out to be true. All I needed was a registration code to prevent the component from popping up the registration requirement. After over a week of waiting, I did not receive any kind of response. I made repeated requests but did not get any response.at all. I am hoping to hear from this outfit but until then I would advise all prospective buyers to be beware of this outfit. BUYER BEWARE!!

UPDATE: The owner finally responded. His agent does have a problem communicating with him. Anyway, I got the code and everything is fine now.

AT&T CALL AND WEB SUPPORT SUCKS!

There are times when we fail to call forward the office number to our home phone number. As our home is far from the office I always attempt to call forward by way of managing the call forwarding through AT&T's web site. However, the feature always return an error! I attempted numerous times but unsuccessful. I tried calling tech support but the other end of the line is an automated voice recognition. I requested for a live person but to no avail. The automated responder always hang-up on me.
This kind of service by AT&T really is a turn off. I do not see any advantage using their services. I have 5 wireless phones, 3 landlines on my business. I am seriously considering canceling their services.

Installing a device in Windows 8.1

Recently I had to transition from an old Windows XP work station to the latest Windows 8.1 system. The problem is one of the printers does not have any driver available on the manufacturers web site. The printer is an Epson LQ 590. This impact printer is not cheap and still in very good condition. I scoured the internet for a driver but it is nowhere to be found. I went ahead made the move to Win8.1, changed the parallel cable of the LQ590 to a USB and to my surprise Win8.1 supplied the driver! I tested the printer and everything worked perfectly. The next printer that needed installed is the Laserjet P2015d. I installed the win8.1 driver (supplied by HP), the printer printed but there was a problem. I get the message "Unable to communicate with the printer", and the printer is not rendering the designed forms properly. Again I scoured the internet for a solution and found none except an unanswered advise from a forum user which is to remove the printer and the installed driver, restart the system then plug in the printer.  This did not work either. I guess I have to live with the message every time I print. My next project is to disable that message.

DJI Phantom Quadcopter Review

I finally got the DJI Phantom for my grandson's birthday. I also bought 2 extra batteries for an added flying time. With anything rotating at high speed I decided to buy him a pair of safety glasses. Before I gift-wrapped the box, I read the charging instruction and followed it to the letter. However, I did not get the correct LED indications that was supposed to be. I continued the charging for 2 hours each battery.
My grandson arrived and was very happy to open his gift. Despite the cold weather he wanted to play with the Phantom. So we did what the instructions said. The set up was easy. GPS setup was uneventful. No fussing. Of course, grandpa had to do the maiden flight. The copter was easy to control and seems to be stable in the air. After five minutes the battery was beginning to wane and not enough power to make the copter fly. Having the extra battery, we replaced the spent battery. The replacement took only 5 minutes. Same thing happened to the 3rd battery. So we went back into the house and attempted to charge the batteries. The indicators led me to conclude that it is defective. This is one of the frustrations that I get when you receive a defective item. Particularly it is worse when you ordered the items from the internet. I wrote the manufacturer regarding the item (charger) and all they did was emailed me the charge instructions. I already told them that I followed the instructions to the letter. In my disappointment, I went to my local hobby store and got an ASCEND balance charger. All I did was swapped the connectors, configured it and charged the batteries. No problem! OK, this is a message to DJI - Before shipping any item you must be sure that it passes quality control testing.

To be fair to DJI, I can say that the Phantom is well made and easy to fly. The charger is a junk!

See the the project here: "Arrowhead Court"

Evaluating Mini-SBC (Single Board Computers)

There are times when I run into an idea that requires use of inexpensive computer system. I used to go with Viatech nanosystems but they are expensive, i.e. in relation to the project budget. After some time I came across various systems like the parallax basic stamp, arduino, Raspberry Pi and Waspmote. I am currently using Arduino on a project (I will divulge this when it is done). My project with Raspberry Pi is in the back burner after I brick the unit (ouch!) when I used it to control an optorelay matrix system. The Waspmote project was a more serious project which will be pursued sometime next month. My current preference for small project is the Arduino due to the vast references available in the web. The language used is C++ which is my second programming language. Using the Raspberry Pi is for the more high-end project. Thanks for Raspbian(linux variant), I am able to utilize my expertise in Pascal, my choice for application programming. The Waspmote is similar to Arduino but a little more sophisticated in terms of wireless and sensor control. It uses C++ as development language.
Overall, my SBC preference is interchangeable and project dependent.

Control your household lamps and your garage doors via the internet

There are times we forget to turn off the lights when we leave the house, or worse, we left the garage door open! Sure we can automate the lights on/off but that leaves control over a timing device without the satisfaction of a personal control. Knowing myself (a control-geek), I wanted that control and the challenge of building the system. I found this: http://connect.iobridge.com/tutorials/open-and-close-your-garage-door-over-the-internet/.
I ordered the items, hacked a few items (the garage door remote) and did a little soldering. Previously, I installed a garage-door monitoring sensor that would turn-on a lamp (by the TV) when the door is left open. The sensor triggers a code and sends it to the receiver which turns the lamp on or off. This signal can also be used to automatically send email to a recipient verifying the status of the garage door.
The camera was located in the garage but have moved it (see view on the right)  facing directly to house where a full-view of the house can be seen. Camera location: the mailbox. So comes the idea to build a mailbox housing the wifi camera. Since the mailbox is about 25 yards from the house, running an electrical wire would be too expensive or too dangerous. So a 15-watt solar panel provides the charge to the 12 volt battery used to power the camera. The camera idea came to reality. See photos below.

Camera located at the post of the mailbox.

View showing proximity of the mailbox to the house.

It is about 25 meters. 

The battery is hidden in the flower pot.

(see image generated on the right).

Using Transcend WIFI SD Card

Recently acquired the card and as always I was excited to take it out of the package as soon as it got into my hands. The WiFi SD card is the the better answer to EYE-FI's limited memory capacity. The 32-gig is plenty for my Canon S95 which I tag along in my pocket everyday. Browsing the internet, I found that the Transcend card is running a variant linux OS with scripts written in PERL and Javascript (see links below). This is most intriguing. The Card is hackable. Being a consultant in Medical/Industrial Informatics the card could be utilized as a data server and be used for gathering data wirelessly from input devices and transferred to software applications for whatever use there may be. The WiFi card has a built in web-server and could be accessed on any PC besides the published apps for Android/IOS devices. To Connect via your PC you will need to connect your PC:
1. Turn on your WIFI-SD card equipped camera. Temporarily disable automatic shutoff of the camera.
2. (Peer-to-peer or Direct Share) With your PC connect (via wifi) to http://192.168.11.254. This is a connection directly to the wifi server of the camera. If you configure your sd-card using the internet mode (see manual below) connect to your wifi access point/router. On your phone app determine the IP Address of the camera under SETTINGS. This should be within address supplied by your router and starts with 192.168.etc.etc. Use this address in your browser.
3. The default username/password is lowercase "admin". You should now see the browser interface along with the self explanatory menu system. You should now be able  to browse/download your photo/video from your camera wirelessly.

Note that when the setting is in INTERNET MODE you can upload or share the picture by using your facebook, twitter, picasa, flickr, etc. Select the appropriate upload app.

That is all there is to it.

Hacking the Transcend WIFI-SD

http://hackaday.com/2013/08/12/hacking-transcend-wifi-sd-cards/
http://haxit.blogspot.ch/2013/08/hacking-transcend-wifi-sd-cards.html

For camera applications of the Transcend WIFI-SD see:
http://www.transcend-info.com/files/Manual/WiFiSD_Manual_v1.4_EN.pdf

Automating your EMR

There are times when your SOAP note has statement that requires input from the user. Study those statements that could be responded to by a standard response, e.g. "YES", "NO", "NEGATIVE", "No significant issues." etc. Instead of typing in the responses, the user can program function keys on the keyboard to automatically post the response into your SOAP note.
The application that can do this is AUTOHOTKEY (www.autohotkey.com). It works for windows only. There may be some out there that work on Mac and Linux. Download the app and read through the tutorial.

What is the best Tablet PC for EMR use?

I have roamed the internet and computer stores to find the most ideal laptop/table/ultrabook for EMR (electronic medical records) applications. Wares that do not have stylus capability were not even evaluated. I was looking for one that could accept handwriting with a fairly good handwriting input interface. Using stylus with stubs as pen is out of the question. I prefer the pen-like size of stylus. The three I considered for evaluation are the Lenovo X230Tablet, Microsoft Surface Pro and Sony Vaio Duo 11.
All of them have good pen-input response. Having loaded the Medical Dictionary helped in the recognition of medical terminologies. Lenovo lends itself for use without being carried around. It is slightly heavy to be cradled. The Surface Pro has some heaviness to it also. With the keyboard the ergonomics of converting to tablet is not as effortless as the Sony Vaio 11. I gave the Sony two thumbs up.
For a comprehensive review see: http://www.notebookcheck.net/Review-Sony-Vaio-Duo-11-SV-D1121X9EB-Ultrabook.84581.0.html

Automate your picture uploads to the web

It is very easy uploading pictures if you do not have a lot to upload, but when you have a lot of them then uploading becomes very tedious. I also want them in my PC as my back up and not endanger their existence when uploaded into the cloud. You can also do this using your mobile phone pictures with the appropriate app, e.g. Factamobile Picture Upload app for Android. I am sure there is an FTP* picture upload for IOS. Here is my solution:
My camera, a Canon EOS 7D is equipped with WFT5 wifi attachment. You may also use the EYE-FI SD card to transmit your photos via a hotspot. The first thing to do is to install an FTP server on your PC. I use FileZilla server. It is freeware and easy to configure. It comes with great tutorials and support from other users. During the configuration you will be asked to name a default folder to receive the pictures sent by the camera. Once you set-up this folder, configure it to sync with either Picasa or Sugarsync. That takes care of automatically uploading to the web. To receive the photos from anywhere you must open up your internet router to port forward to your PC. To port forward to your FTP server, here are the steps you need:

• Determine the IP address of your PC where the FTP server is located. It usually starts with 192.168.....
• Open up your modem/router. Consult with your router manual for the IP address.
• Log on to your router from your favorite browser and look for "Port Forwarding" or "pinholes" option.
• Forward port 21 (usually the FTP port, change if otherwise) with the IP address of your pc.
• Determine your WAN* IP or Internet IP address. If you do not know this, google using your PC and search for "what is my IP". This should show your internet IP.
• In your camera setting, select FTP server option. Enter your credentials and the FTP address as InternetIP:21 (replace InternetIP with the IP you obatined).

Fireup the server. Turn on your camera and see if it can upload the picture. NOTE: If you are within your local network, use the PC LAN* IP, the one that starts with the 192.168.etc

*Note: FTP - File Transfer Protocol; LAN - Local Area Network; WAN - Wide Area Network